Paint within weeks when applied, it starts to fall off. This is happening where paint gets in contact to salts and water. Salts swept through the plaster from foundation, compound walls and from the roof. Paint loses its adhesion with the plaster. Then, it starts peel off and fall off. Tectevo come up with a full and a superior solution, See photo below that exhibited the performance of Tectevo solutions..
Photo on left shows market paint failed in weeks and photo on the right shows the robustness of the Tectevo products.
It is a primer. It is a nano silicon acrylic based. It is a nano material. Highly effective to stop the ingress of water.
It is used on difficult surfaces. It is best in class to stop the ingress of water.
It stops water ingress and has excellent adhesion. Apply after the primer.
It is silicone acrylic hybrid system. It is semi-elastic and has a strong adheres to various surfaces and it is a made for the cold weather areas. It is an alternative to TEVO 2010 for cold weather conditions.
It is a viscoelastic roof coating. It is applied on a primer (TEVO 2010 or TEVO 2028) and it adheres to various surfaces with exceptional peel. It stops efflorescence from plaster, tiles, stones, and klin bricks. Comes in grey, white, blue, green, and red colors.
Please reach us at if you cannot find an answer to your question.
TEVO 2010:Tevo 2034:TEVO 2030E, Cold weather replace TEVO 2010 with TEVO 2028
Wrote to Info@techtevo.com
This offered package is expectinal and stands out in safety. It has low residual monomers less than 60 ppm, it is an APE free, it is a low odour and it is safer to apply and it is also odorless. It is among the safest product in the market.
This product is nano silicone acrylics. Safe to use and covers more than 100 sq.ft per kg. It is good for all seasons and all regions of the country.
It is an ideal top coat comes in white and grey colors and it reflects light and provide an ease and comfort and helps to reduce the energy used for the air.
It comes in a package of a gallon or in the pail bucket.
Sand the plaster. Remove dust, debris, and it should be wet free, or and cavities free. Fill cavities with TEVO WallPutty. Then, apply two coats of TEVO 2010 crosswise. When TEVO 2010 was dried apply two coats of TEVO paint or TEVO 2030E two coats.
TEVO 2029 and TEVO 2034 are two sealants are recommended to repair the cracks and the expansion joint. After repairs
Apply two coat of the primer TEVO 2010 and then two coats of TEVO 2030E cross wise.
Tevo Manzal, A-2
Lahore Cantonment
Pakistan
Phone: +92 349 483639
Give us a call or write us @ info@techtevo.com